IVECO ASTRA HD9

EXTRA STRONG VEHICLE

– Gross vehicle weight: up to 63 ton
– Large chassis “C “ section
– High tensile strength steel (530 MPa)
– Cast iron rear suspension shoulder with 120mm pin
– “Power Ring”: rear tandem closed by lower cross bar
– Oversize steering rods
– Wide engine heat exchanger surface
– Reinforced transfer box standard and extra heavy-duty type for engine power >500 HP and HHD
– Heavy duty components (i.e. oversize air filter, brass front suspension bushings)

READY FOR EXTREME CONDITIONS

– Straight chassis side members (easy to equip)
– Best in class torsional stiffness (up to 300 kN*m)
– Engine performance up to 560 HP
– Automatic transmission with or without retarder
– Reinforced heavy duty front axle up 10 ton payload
– Reinforced rear axles up to 20 ton payload
– Full traction range availability (from 4×2 to 8×8)
– Ground clearance between axles fit for heavy-off applications
– Wide heavy duty opt range (e.g. ceramic clutch, LED lights)

EASY to SET UP/EQUIP, USE AND REPAIR, EVERYWHERE

– Simple mechanical architecture
– Simple electronic architecture with no control unit on the chassis frame
– Drum brakes
– Rear tandem pin and front axle hubs lubrication with grease (instead of oil)
– Brass front suspension bushings
– Wide and totally tiltable front cover
– Entrance steps tiltable with cab

TECHNICAL GALLERY